Re: How to configure report that filtered nodes / Acknowledged interface.
The report must contain the following information must ..I need some help p to the function of this report. Problems - WITH ACKNOWLEDGED Node IDDescriptionTempo/Duração< dia/hora/minuto...
View ArticleClik here to view.
Re: Alerting for node reboot where node rebooted between status intervals
Have you setup an alert that will tell you when it reboots? (Note: a restart of the SNMP service will show up as a reboot)
View ArticleRe: Can't connect to vCenter 5.1
That worked. Once the SNMP was running I was able to add the SNMP, then connect it as a vCenter. Thank you for all of the help.
View ArticleClik here to view.
Re: Can't connect to vCenter 5.1
No problem! Glad you were able to get it squared away!
View ArticleClik here to view.
Re: TripWire Connector: How to use?
Update - we just quickly confirmed on our end that the LEM appliance can receive TCP/syslog on 514. If those log lines are from LEM's logs, it is indicating that syslog-ng on our end is receiving the...
View ArticleRe: How to monitor VMAN for health?
I sent this very question to tech support and they got back with monitoring the tomcat6 service, using net-snmp, and monitor the postgres process. Your idea is interesting though.
View ArticleIf you use the Customer Portal, we want to talk to you!
We are working on some new design ideas to improve the Customer Portal and we want to hear what you think about them! If you are interested in participating in a 1 hour feedback session to give us your...
View ArticleUpgrade UDT 3.0 nightly job issue
We recently upgraded UDT module to 3.0 (we also have NPM SLX, NCM, NTA, SAM, NQVM). Nightly job prior to UDT upgrade, would complete in 90-120min. This is something I monitor to ensure summarization,...
View ArticleRe: Roles and Permissions In Network Config and Management
I am just now setting up Orion with NCM plus other modules. I am using AD groups, but I think I might need a few AD user entries to get more granular. TACACS protects most of the devices. I am...
View ArticleRe: Thin Provisioning – Good Idea, Bad Idea, or “It Depends?”
I've used thin provisioning on a HDS USP-V. When it was replaced with a HDS VSP, we used it again. On HDS enterprise arrays, you get a performance/tuning benefit as it stripes your data across many...
View ArticleNeed report that shows multiple split timeframes
I need to produce a report that shows utilization between the hours of 0600-1800 and 1800-0600 for the entire month.The report must show monthly average and peak for 0600 thorough 1800 and 1800 through...
View ArticleRe: Monitoring maximum bandwidth usage
If I read you correctly, in order to have my peaks (or averages for that matter) display as flat tops verses individual peaks, I would need to poll more often than default, _or_ have much longer peaks...
View ArticleRe: dnsstuff.com giving bad information.
LGarvin wrote: 64.18.4.11 | WARNING: The hostname in the SMTP greeting does not match the reverse DNS (PTR) record for your mail server. This probably won't cause any harm, but may be a technical...
View ArticleRe: SAM 6.0 Beta 3 - Comments
rmcder I'm glad you're enjoying the SAM 6.0 beta so far. As for AppInsight for other applications, susan chopra is looking for volunteers to provide feedback on some early prototypes she's been working...
View ArticleRe: installing orion npm
hi Jon, at 1st i installed the orion npm license evaluation, then since we bought the license so we need to activate it.. in adding a node, i would like to ask your opinion about this: defining...
View ArticleRe: Negative Volume Usage detected - Why?
I believe smargh is correct. The issue here is that the monitored volume probably doesn't exist anymore. Either it was dismounted, removed from the server, or renamed. To avoid these alerts you can add...
View ArticleRe: File Count Monitor - reporting 0 files
Since information regarding the mount point/s is not contained within the CIM_DataFile class the File Monitors in SAM will not work. I recommend posting a feature request to all support for Windows...
View ArticleRe: Monitoring XenApp 6.5 Application Usage
At this time SAM does not provide Citrix user reporting services like the ones described above.
View ArticleRe: Alert Rule for File Age Monitor
The only way an alert can be cleared is if the trigger condition is no longer true. This means that the component monitor responsible for monitoring the files will need to be managed and allowed to...
View ArticleRe: SAM Database Maintenance Is Overdue
Maintenance should occur nightly at 2:15am (by default). This can be configured under [Settings - Polling Settings - Database Settings - Archive Time]. If the Orion or SQL server are configured to...
View Article